Show simple item record

dc.contributor.advisorMolloy, Padraig
dc.contributor.advisorKeane, Marcus
dc.contributor.authorCoakley, Daniel
dc.date.accessioned2014-06-26T11:54:59Z
dc.date.available2014-06-26T11:54:59Z
dc.date.issued2014-05-30
dc.identifier.urihttp://hdl.handle.net/10379/4421
dc.description.abstractOver the past few decades, advances in technology, most notably the industrial revolution of the late 18th-century, has brought about dramatic improvements in the socioeconomic circumstances of developed nations. This has also brought with it rapid change in terms of human population, environmental impacts as well as energy consumption. Growth in energy consumption has been largely associated with increased use of finite fossil fuels (oil, coal, gas) in industrialized nations. However, this growth is unsustainable due to the depletion of these natural resources as well as the impact their consumption has on the environment, in terms of carbon dioxide (CO2) emissions. A shift towards renewable fuels (wind, hydro, solar, geothermal, tidal) is currently underway, but progress remains slow, and the current reliance on fossil fuels for many existing essential technologies (e.g. transport) remains a major barrier to the large-scale transition that is required. Energy efficiency has the potential to mitigate greenhouse gas emissions (GHG) and provide additional scope for the transition to a sustainable renewables-based energy future. Buildings account for approximately 40% of global energy consumption. Approximately half of this energy requirement stems from space heating and cooling. Studies have shown that savings of up to 40% are possible through the implementation of energy conservation measures (ECM's) and continuous commissioning (CC). Whole building energy simulation tools have the potential to play a significant role in achieving this goal. However, their widespread adoption in the AEC (Architecture, Engineering and Construction) industry depends on their perceived reliability and the accuracy of their outputs. Currently, simulation tools are used primarily in building design with little integration or comparison to real building operation. It is often found that the actual buildings perform far worse than the design simulation initially predicted. This gap between measured and simulated data needs to be carefully addressed. This thesis proposes a new methodology for calibrating building energy simulation (BES) models to measured data including the incorporation of parameter uncertainty into final model predictions and recommendations.en_US
dc.subjectEnergyPlusen_US
dc.subjectEnergy simulationen_US
dc.subjectUncertainty analysisen_US
dc.subjectEnergy conservation measuresen_US
dc.subjectBuilding retrofiten_US
dc.subjectSensitivity analysisen_US
dc.subjectEngineering and Informaticsen_US
dc.titleCalibration of detailed building energy simulation models to measured data using uncertainty analysisen_US
dc.typeThesisen_US
dc.contributor.funderCollege of Engineering and Informaticsen_US
dc.local.noteThis thesis proposes a novel methodology of the calibration of building energy simulation models to measured building energy-use data. The purpose of this research is to provide a means of assessment energy conservation measures (ECM's) and characterising uncertainty in energy use predictions.en_US
dc.local.finalYesen_US
nui.item.downloads4887


Files in this item

Attribution-NonCommercial-NoDerivs 3.0 Ireland
This item is available under the Attribution-NonCommercial-NoDerivs 3.0 Ireland. No item may be reproduced for commercial purposes. Please refer to the publisher's URL where this is made available, or to notes contained in the item itself. Other terms may apply.

The following license files are associated with this item:

Thumbnail

This item appears in the following Collection(s)

Show simple item record